• Phone: 800.221.0270
  • Fax: 800.722.0703

2 & 4 Flute SuperCEED® Solid Carbide Coated Ultra Fine Micrograin Carbide Finishing Stub Length Single End Mills

Brand: T&O

Features

Heat Generation Reduced
  • Lower friction.
  • Restricted heat conductivity.
  • Reduced thermal impairment of cutting edges.
  • Increased cutting speed.
Chip Formation Improved
  • Lower friction, higher flow speed.
  • Reduced chip compression/cutting forces.
Extension Of Tool Performance
  • High hardness protects against abrasive wear.
  • High chemical stability prevents built-up edge micro cracks and crater wear.
  • Better surface finish and tool life.

Use filters to refine product options

Enter quantity and add to cart

Finishing End Mills-2 Flute

Item #BrandSizeNo. of FlutesLength of CutShank DiameterTool MaterialFinish CoatingPriceUOMQty
Item #: 20-104-100Brand: T&OSize: 1/16"No. of Flutes: 2Length of Cut: 1/8"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$9.41
UOM: EACH
Qty:
Item #: 20-104-102Brand: T&OSize: 3/32"No. of Flutes: 2Length of Cut: 3/16"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$9.41
UOM: EACH
Qty:
Item #: 20-104-104Brand: T&OSize: 1/8"No. of Flutes: 2Length of Cut: 1/4"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$9.08
UOM: EACH
Qty:
Item #: 20-104-106Brand: T&OSize: 5/32"No. of Flutes: 2Length of Cut: 5/16"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$11.65
UOM: EACH
Qty:
Item #: 20-104-108Brand: T&OSize: 3/16"No. of Flutes: 2Length of Cut: 3/8"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$11.93
UOM: EACH
Qty:
Item #: 20-104-110Brand: T&OSize: 7/32"No. of Flutes: 2Length of Cut: 7/16"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$14.33
UOM: EACH
Qty:
Item #: 20-104-112Brand: T&OSize: 1/4"No. of Flutes: 2Length of Cut: 1/2"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$14.89
UOM: EACH
Qty:
Item #: 20-104-114Brand: T&OSize: 5/16"No. of Flutes: 2Length of Cut: 1/2"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$19.42
UOM: EACH
Qty:
Item #: 20-104-116Brand: T&OSize: 3/8"No. of Flutes: 2Length of Cut: 5/8"Shank Diameter: 3/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$23.92
UOM: EACH
Qty:
Item #: 20-104-120Brand: T&OSize: 1/2"No. of Flutes: 2Length of Cut: 5/8"Shank Diameter: 1/2"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$41.61
UOM: EACH
Qty:
Item #: 20-104-122Brand: T&OSize: 5/8"No. of Flutes: 2Length of Cut: 3/4"Shank Diameter: 5/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$80.52
UOM: EACH
Qty:
Item #: 20-104-124Brand: T&OSize: 3/4"No. of Flutes: 2Length of Cut: 1"Shank Diameter: 3/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$119.72
UOM: EACH
Qty:
Item #: 20-104-160Brand: T&OSize: 1/16"No. of Flutes: 2Length of Cut: 1/8"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$9.67
UOM: EACH
Qty:
Item #: 20-104-162Brand: T&OSize: 3/32"No. of Flutes: 2Length of Cut: 3/16"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$9.67
UOM: EACH
Qty:
Item #: 20-104-164Brand: T&OSize: 1/8"No. of Flutes: 2Length of Cut: 1/4"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$9.26
UOM: EACH
Qty:
Item #: 20-104-166Brand: T&OSize: 5/32"No. of Flutes: 2Length of Cut: 5/16"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$11.85
UOM: EACH
Qty:
Item #: 20-104-168Brand: T&OSize: 3/16"No. of Flutes: 2Length of Cut: 3/8"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$12.14
UOM: EACH
Qty:
Item #: 20-104-170Brand: T&OSize: 7/32"No. of Flutes: 2Length of Cut: 7/16"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$14.60
UOM: EACH
Qty:
Item #: 20-104-172Brand: T&OSize: 1/4"No. of Flutes: 2Length of Cut: 1/2"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$15.13
UOM: EACH
Qty:
Item #: 20-104-174Brand: T&OSize: 5/16"No. of Flutes: 2Length of Cut: 1/2"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$19.74
UOM: EACH
Qty:
Item #: 20-104-176Brand: T&OSize: 3/8"No. of Flutes: 2Length of Cut: 5/8"Shank Diameter: 3/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$24.19
UOM: EACH
Qty:
Item #: 20-104-180Brand: T&OSize: 1/2"No. of Flutes: 2Length of Cut: 5/8"Shank Diameter: 1/2"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$42.12
UOM: EACH
Qty:
Item #: 20-104-182Brand: T&OSize: 5/8"No. of Flutes: 2Length of Cut: 3/4"Shank Diameter: 5/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$81.03
UOM: EACH
Qty:
Item #: 20-104-184Brand: T&OSize: 3/4"No. of Flutes: 2Length of Cut: 1"Shank Diameter: 3/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$120.59
UOM: EACH
Qty:

Finishing End Mills-Multi Flute

Item #BrandSizeShank DiameterFlute LengthOverall LengthFinish CoatingTool MaterialPriceUOMQty
Item #: 20-101-100Brand: T&OSize: 1/16"Shank Diameter: 1/8"Flute Length: 1/8"Overall Length: 1-1/2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$9.81
UOM: EACH
Qty:
Item #: 20-101-102Brand: T&OSize: 3/32"Shank Diameter: 1/8"Flute Length: 3/16"Overall Length: 1-1/2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$9.81
UOM: EACH
Qty:
Item #: 20-101-104Brand: T&OSize: 1/8"Shank Diameter: 1/8"Flute Length: 1/4"Overall Length: 1-1/2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$9.04
UOM: EACH
Qty:
Item #: 20-101-106Brand: T&OSize: 5/32"Shank Diameter: 3/16"Flute Length: 5/16"Overall Length: 2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$13.71
UOM: EACH
Qty:
Item #: 20-101-108Brand: T&OSize: 3/16"Shank Diameter: 3/16"Flute Length: 3/8"Overall Length: 2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$12.32
UOM: EACH
Qty:
Item #: 20-101-112Brand: T&OSize: 1/4"Shank Diameter: 1/4"Flute Length: 1/2"Overall Length: 2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$18.01
UOM: EACH
Qty:
Item #: 20-101-114Brand: T&OSize: 5/16"Shank Diameter: 5/16"Flute Length: 1/2"Overall Length: 2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$23.26
UOM: EACH
Qty:
Item #: 20-101-116Brand: T&OSize: 3/8"Shank Diameter: 3/8"Flute Length: 5/8"Overall Length: 2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$29.54
UOM: EACH
Qty:
Item #: 20-101-120Brand: T&OSize: 1/2"Shank Diameter: 1/2"Flute Length: 5/8"Overall Length: 2-1/2"Finish Coating: TiNTool Material: Solid CarbidePrice:
$50.96
UOM: EACH
Qty:
Item #: 20-101-122Brand: T&OSize: 5/8"Shank Diameter: 5/8"Flute Length: 3/4"Overall Length: 3"Finish Coating: TiNTool Material: Solid CarbidePrice:
$95.89
UOM: EACH
Qty:
Item #: 20-101-124Brand: T&OSize: 3/4"Shank Diameter: 3/4"Flute Length: 1"Overall Length: 3"Finish Coating: TiNTool Material: Solid CarbidePrice:
$145.52
UOM: EACH
Qty:
Item #: 20-101-160Brand: T&OSize: 1/16"Shank Diameter: 1/8"Flute Length: 1/8"Overall Length: 1-1/2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$11.10
UOM: EACH
Qty:
Item #: 20-101-162Brand: T&OSize: 3/32"Shank Diameter: 1/8"Flute Length: 3/16"Overall Length: 1-1/2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$11.10
UOM: EACH
Qty:
Item #: 20-101-164Brand: T&OSize: 1/8"Shank Diameter: 1/8"Flute Length: 1/4"Overall Length: 1-1/2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$10.25
UOM: EACH
Qty:
Item #: 20-101-166Brand: T&OSize: 5/32"Shank Diameter: 3/16"Flute Length: 5/16"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$15.18
UOM: EACH
Qty:
Item #: 20-101-168Brand: T&OSize: 3/16"Shank Diameter: 3/16"Flute Length: 3/8"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$13.75
UOM: EACH
Qty:
Item #: 20-101-170Brand: T&OSize: 7/32"Shank Diameter: 1/4"Flute Length: 7/16"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$19.19
UOM: EACH
Qty:
Item #: 20-101-172Brand: T&OSize: 1/4"Shank Diameter: 1/4"Flute Length: 1/2"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$19.83
UOM: EACH
Qty:
Item #: 20-101-174Brand: T&OSize: 5/16"Shank Diameter: 5/16"Flute Length: 1/2"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$25.36
UOM: EACH
Qty:
Item #: 20-101-176Brand: T&OSize: 3/8"Shank Diameter: 3/8"Flute Length: 5/8"Overall Length: 2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$32.05
UOM: EACH
Qty:
Item #: 20-101-180Brand: T&OSize: 1/2"Shank Diameter: 1/2"Flute Length: 5/8"Overall Length: 2-1/2"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$54.60
UOM: EACH
Qty:
Item #: 20-101-182Brand: T&OSize: 5/8"Shank Diameter: 5/8"Flute Length: 3/4"Overall Length: 3"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$102.27
UOM: EACH
Qty:
Item #: 20-101-184Brand: T&OSize: 3/4"Shank Diameter: 3/4"Flute Length: 1"Overall Length: 3"Finish Coating: TiCNTool Material: Solid CarbidePrice:
$155.87
UOM: EACH
Qty:

Be the first to review this product: