3 Flute M42 8% Cobalt Round Pitch Stub Length Roughing Single End Mill
TTC PRODUCTION 3 Flute M42 8% Cobalt Round Pitch Stub Length Roughing Single End Mill - Tool Material: M42 8% Cobalt  Size: 1/4  Number of Flutes: 3  Flute Length: 1/4  Overall Length: 2-1/16

3 Flute M42 8% Cobalt Round Pitch Stub Length Roughing Single End Mill

Item #: 08-202-020
Brand: TTC PRODUCTION HP
Size: 1/4"
Length of Cut: 1/4"
Shank Diameter: 3/8"

Master Catalog Listing

Need a different size, length or brand?

View Product Group Page
Stub length offers greater rigidity over regular lengths

Features

TiN (Titanium Nitride)
  • This treatment will provide heat resistance and extreme hardness to allow the tool to run at higher feeds and speeds.
  • TiN allows higher lubricity for freer chip flow, reducing build-up edge formation and cratering - great for general purpose use.
  • On non-ferrous materials there is a tendency to gall, so please use caution.
  • TiN also requires an increase of 25% to 30% in machining speeds vs. uncoated tools.
TiCN (Titanium Carbonitride)
  • When under conditions of moderate cutting temperatures, TiCN provides harder and more wear resistant than TiN.
  • It also provides 50% more spindle speed compared to TiN, especially in stainless steels.
  • There is a tendency to gall on non-ferrous materials, so please use caution.
  • TiCN also requires an increase of 35% to 50% in machining speeds vs. uncoated tools.
TTC PRODUCTION M42 Cobalt 3 Flute Stub Center Cutting Uncoated Multiple Flute Fine Tooth Roughing Si
Product Specifications
Brand TTC PRODUCTION HP
Size 1/4"
Length of Cut 1/4"
Shank Diameter 3/8"
Tool Material M42 8% Cobalt
Finish Coating Uncoated
Pitch Fine
No. of Flutes 3
Overall Length 2-1/16"
Center Cutting Yes
End Type Single End
Flute Shape Fine Pitch
Length Type Stub Length
Series D34SF
Type 3 Flute M42 8% Cobalt Round Pitch Stub Length Roughing Single End Mill
Weight 0.1 lb.
Country of Origin Import

Other Items to Consider

SHAVIV Rout-A-Burr Set - Mfr Number: 3SB----I