T&O 3/32" Size, 3/8" LOC, 4 Flute, Solid Carbide Finishing End Mill
Item #: 20-101-192

Brand: T&O
Size Type: Fractional
Size: 3/32"
No. of Flutes: 4
Master Catalog Listing
Need a different size, length or brand?
View Product Group Page- Lower friction.
- Restricted heat conductivity.
- Increased cutting speed.
- Lower friction, higher flow speed.
- Reduced chip compression/cutting forces.
- High hardness protects against abrasive wear.
- High chemical stability prevents built-up edge, micro cracks and crater wear.
- Increase in tool life.
- This treatment will provide heat resistance and extreme hardness to allow the tool to run at higher feeds and speeds.
- TiN allows higher lubricity for freer chip flow, reducing build-up edge formation and cratering - great for general purpose use.
- On non-ferrous materials there is a tendency to gall so please use caution.
- TiN also requires an increase of 25% to 30% in machining speeds vs. uncoated tools.
- When under conditions of moderate cutting temperatures, TiCN is harder and more wear resistant than TiN.
- It also provides 50% more spindle speed compared to TiN, especially in stainless steels.
- There is a tendency to gall on non-ferrous materials so please use caution.
- TiCN also requires an increase of 35% to 50% in machining speeds vs. uncoated tools.
Features
Heat Generation ReducedProduct Specifications | |
---|---|
Brand | T&O |
Size Type | Fractional |
Size | 3/32" |
No. of Flutes | 4 |
Length of Cut | 3/8" |
Shank Diameter | 1/8" |
Tool Material | Solid Carbide |
Finish Coating | TiCN |
Center Cutting | Yes |
Single or Double End | Single |
Overall Length | 1-1/2" |
Corner Radius | 0 |
Helix Angle | 30° |
For Shank Diameter | 1/8" |
Cutting Direction | Right Hand |
First Choice For: | High Temp Exotic Alloys |
Flute Shape | Helix |
Length Type | Standard Length |
Model # | 20-101-192 |
Prop. 65 | Yes |
Shank Style | Straight Shank |
Tolerance_Cutting Diameter | -.0005" / -.0015" |
Tolerance_Shank Diameter | -.0001" / -.0005" |
Type | 4 Flute SuperCEED® Solid Carbide Coated Finishing Single End Mill |
Weight | 0.02 lbs. |
Workpiece Material Range | Steel, Stainless Steel, High-Temp Exotic Alloys, Non-Ferrous, Cast Iron, Hard Materials, Plastics |
Country of Origin | Import |
