• Phone: 800.221.0270
  • Fax: 800.722.0703

4 Flute SuperCEED® Solid Carbide Coated Finishing Single End Mills

Brand: T&O

Features

Heat Generation Reduced
  • Lower friction.
  • Restricted heat conductivity.
  • Increased cutting speed.
Chip Formation Improved
  • Lower friction, higher flow speed.
  • Reduced chip compression/cutting forces.
Extension Of Tool Performance
  • High hardness protects against abrasive wear.
  • High chemical stability prevents built-up edge, micro cracks and crater wear.
  • Increase in tool life.
TiN (Titanium Nitride)
  • This treatment will provide heat resistance and extreme hardness to allow the tool to run at higher feeds and speeds.
  • TiN allows higher lubricity for freer chip flow, reducing build-up edge formation and cratering - great for general purpose use.
  • On non-ferrous materials there is a tendency to gall so please use caution.
  • TiN also requires an increase of 25% to 30% in machining speeds vs. uncoated tools.
TiCN (Titanium Carbonitride)
  • When under conditions of moderate cutting temperatures, TiCN provides harder and more wear resistant than TiN.
  • It also provides 50% more spindle speed compared to TiN, especially in stainless steels.
  • There is a tendency to gall on non-ferrous materials so please use caution.
  • TiCN also requires an increase of 35% to 50% in machining speeds vs. uncoated tools.

Use filters to refine product options

Enter quantity and add to cart

Finishing End Mills-Multi Flute

Item #BrandSizeNo. of FlutesLength of CutShank DiameterTool MaterialFinish CoatingPriceUOMQty
Item #: 20-101-130Brand: T&OSize: 1/16"No. of Flutes: 4Length of Cut: 3/16"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$11.24
UOM: EACH
Qty:
Item #: 20-101-132Brand: T&OSize: 3/32"No. of Flutes: 4Length of Cut: 3/8"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$11.24
UOM: EACH
Qty:
Item #: 20-101-134Brand: T&OSize: 1/8"No. of Flutes: 4Length of Cut: 1/2"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$10.25
UOM: EACH
Qty:
Item #: 20-101-136Brand: T&OSize: 5/32"No. of Flutes: 4Length of Cut: 9/16"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$15.17
UOM: EACH
Qty:
Item #: 20-101-138Brand: T&OSize: 3/16"No. of Flutes: 4Length of Cut: 5/8"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$14.06
UOM: EACH
Qty:
Item #: 20-101-140Brand: T&OSize: 7/32"No. of Flutes: 4Length of Cut: 5/8"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$18.99
UOM: EACH
Qty:
Item #: 20-101-142Brand: T&OSize: 1/4"No. of Flutes: 4Length of Cut: 3/4"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$15.72
UOM: EACH
Qty:
Item #: 20-101-144Brand: T&OSize: 9/32"No. of Flutes: 4Length of Cut: 3/4"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$22.67
UOM: EACH
Qty:
Item #: 20-101-146Brand: T&OSize: 5/16"No. of Flutes: 4Length of Cut: 13/16"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$23.51
UOM: EACH
Qty:
Item #: 20-101-148Brand: T&OSize: 3/8"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 3/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$29.80
UOM: EACH
Qty:
Item #: 20-101-150Brand: T&OSize: 7/16"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 7/16"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$36.79
UOM: EACH
Qty:
Item #: 20-101-152Brand: T&OSize: 1/2"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 1/2"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$48.29
UOM: EACH
Qty:
Item #: 20-101-154Brand: T&OSize: 5/8"No. of Flutes: 4Length of Cut: 1-1/4"Shank Diameter: 5/8"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$93.12
UOM: EACH
Qty:
Item #: 20-101-156Brand: T&OSize: 3/4"No. of Flutes: 4Length of Cut: 1-1/2"Shank Diameter: 3/4"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$136.64
UOM: EACH
Qty:
Item #: 20-101-158Brand: T&OSize: 1"No. of Flutes: 4Length of Cut: 1-1/2"Shank Diameter: 1"Tool Material: Solid CarbideFinish Coating: TiNPrice:
$204.11
UOM: EACH
Qty:
Item #: 20-101-190Brand: T&OSize: 1/16"No. of Flutes: 4Length of Cut: 3/16"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$11.24
UOM: EACH
Qty:
Item #: 20-101-192Brand: T&OSize: 3/32"No. of Flutes: 4Length of Cut: 3/8"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$11.24
UOM: EACH
Qty:
Item #: 20-101-194Brand: T&OSize: 1/8"No. of Flutes: 4Length of Cut: 1/2"Shank Diameter: 1/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$10.25
UOM: EACH
Qty:
Item #: 20-101-196Brand: T&OSize: 5/32"No. of Flutes: 4Length of Cut: 9/16"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$15.17
UOM: EACH
Qty:
Item #: 20-101-198Brand: T&OSize: 3/16"No. of Flutes: 4Length of Cut: 5/8"Shank Diameter: 3/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$14.06
UOM: EACH
Qty:
Item #: 20-101-200Brand: T&OSize: 7/32"No. of Flutes: 4Length of Cut: 5/8"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$18.99
UOM: EACH
Qty:
Item #: 20-101-202Brand: T&OSize: 1/4"No. of Flutes: 4Length of Cut: 3/4"Shank Diameter: 1/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$15.72
UOM: EACH
Qty:
Item #: 20-101-204Brand: T&OSize: 9/32"No. of Flutes: 4Length of Cut: 3/4"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$22.67
UOM: EACH
Qty:
Item #: 20-101-206Brand: T&OSize: 5/16"No. of Flutes: 4Length of Cut: 13/16"Shank Diameter: 5/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$23.51
UOM: EACH
Qty:
Item #: 20-101-208Brand: T&OSize: 3/8"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 3/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$29.80
UOM: EACH
Qty:
Item #: 20-101-210Brand: T&OSize: 7/16"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 7/16"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$36.79
UOM: EACH
Qty:
Item #: 20-101-212Brand: T&OSize: 1/2"No. of Flutes: 4Length of Cut: 1"Shank Diameter: 1/2"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$48.29
UOM: EACH
Qty:
Item #: 20-101-214Brand: T&OSize: 5/8"No. of Flutes: 4Length of Cut: 1-1/4"Shank Diameter: 5/8"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$93.12
UOM: EACH
Qty:
Item #: 20-101-216Brand: T&OSize: 3/4"No. of Flutes: 4Length of Cut: 1-1/2"Shank Diameter: 3/4"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$136.64
UOM: EACH
Qty:
Item #: 20-101-218Brand: T&OSize: 1"No. of Flutes: 4Length of Cut: 1-1/2"Shank Diameter: 1"Tool Material: Solid CarbideFinish Coating: TiCNPrice:
$204.11
UOM: EACH
Qty:

Be the first to review this product: