Dial Test indicators are the best aid in part setup during the machining process. Get dial face in White, Yellow, Black, or Red for easy readability on shop-floor. Test indicators generally have higher resolution and a shorter range of measurement. Standard resolution test indicators are available in 0.0001 to 0.00005 inch (0.01 to 0.001 mm) with measurement range being between �0.004 and �0.015 inch (�0.04 and �0.025 mm). Dial Test indicators enable only a single revolution of the pointer around the dial, and test indicator pointers always travel clockwise. The dials are balanced, meaning that the numbers keep ascending in both directions from zero. Get dial reading in both format like 0-0.4-0, 0-10-0, 0-.25-0, 0-100, 0-100-0, 0-15-0, 0-20-0, 0-30-0, 0-35-0, 0-4-0, 0-40-0, 0-5-0, 0-50-0 and continuous: 0-.100 to suit specific measuring applications. Setup your Dial Test indicators using a compatible height stand which you can be bought here. Back plunger dial indicator models are also available. You may enquire more about it over a call. Choose from over 165 options of Dial Test indicators from leading brands including Starrett, Mitutoyo, TESA Brown & Sharpe, Fowler, and varying measuring range, only on Travers. Test indicators can be oriented more flexibly relative to the workpiece. Different types of Dial Test indicators here on offer include Horizontal Set, Vertical Set, Three-Way Swivel Head, IP65 protected indicators. Dial Test indicators are also available in sets with single dial indicator and varying deattachable feelers/contact points.