TTC 199-1051 0-25 Inch/Minute Feed Rate X-Axis Power Feed
Item #
80-200-300
- Brand: TTC
- Model #: 199-1051
- For Use With: Bridgeport® Type
- Maximum Torque: 150 Ibs./inch
Product Specifications
Brand | TTC |
---|---|
Model # | 199-1051 |
For Use With | Bridgeport® Type |
Maximum Torque | 150 Ibs./inch |
Feed Rate | 0-25 Inch/Minute |
Type | Power Feed |
Bevel Drive Gear Ratio | 4.8:1 |
Cycle | 50/60 Cycle |
Phase | 1 PH |
Power | 110 Volts, 60Hz |
Prop. 65 | Yes |
Speed | 4-180 RPM |
Table Feed | Bridgeport |
Traversing Speed | 40 Inch/Minute |
Voltage | 110V |
Weight | 20 lbs. |
Country of Origin | IMPORT |
Many metalworking products do contain metals that are included in the latest Prop 65 warning. Exposure to the elements can be harmful. May cause cancer and reproductive harm.
Details
Optimize Your Machining Operations with TTC Power Table Feeds. The power feeds from TTC provide you with superior speed and a controlled feed rate that can immensely enhance productivity. It is designed for use with Bridgeport type Milling machines. The feed rate offered here is 0.25 inch/minute. This power feeds further helps you get extended life for your cutting tools. The maximum torque produced by the power feed is in the range of 150lbs./inch. They work the best in a 110V, 50/60Hz, and 2.5amp electrical configuration. Servo Type 150 power feeds, on the other hand, have a peak torque of 150 lb-inches. They offer table and cross feeds and enable smooth surface finishes at full torque and low speeds. Their recommended electrical configuration is 110V, 50/60 Hz, and 3 amp. These power feeds help you regulate speed and offer ramping and dynamic braking. Coming with a 4:8:1 bevel gear reduction ratio, both power feed types have helical gearing and a torque-limiting friction-safety clutch with improved gear. The power feeds from TTC maximize cutting rates, and they help you stay away from exhausting hand cranking. The power feeds provide you with simple controls with an on/off switch, and they also come with a circuit breaker to provide superior protection. The brand is popular among thousands of small shop machinists, and do-it-yourself hobbyists everywhere. You can find a range of carbide and high-speed steel radius and cutting tools, abrasives, holding accessories, and much more from the TTC brand here. All TTC products are globally sourced and meet standard ANSI tolerances and requirements. This brand is now a top choice for common materials, short-run jobs, and general-purpose projects.
Produce more parts without the continual drudgery of having to hand-crank your mill
Benefits
- Controlled feed rate increases cutting tool life and provides superior finish.
- Increases productivity.
- No more hand cranking.
- No loss of dial or hand crank.
Features
- Reversible.
- Variable speed control allows the operator to select the right speed for the selected cut.
- Limit switch for sensitive stop.
- Auto shut-off at end of cut.
Technical Documents & Manuals
Reviews