MASTER FLUID SOLUTIONS MS585XT/54 Cutting and Grinding Type, 54 Gallon Container Size Soluble Cutting Coolant

Machine Shop Solutions

Problem: Traditional coolants can offer varying wear and corrosion results depending on the material. Solution: A micro-emulsion formula offers premium lubrication across gray irons, mixed metals and titanium alloys.TRIM® MicroSol® 585XT is a high-lubricity and semi-synthetic microemulsion coolant. The formula delivers extended sump life and better foam control versus previous-generation semi-synthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you'd expect from a premium TRIM® coolant. While it is particularly well-suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol® 585XT has proven to be an exceptional machining fluid for titanium alloys.

Applications

• MicroSol 585XT performs well where traditional soluble oils may not cool sufficiently.
• In mixed-metal situations, concentration control is critical to fight galvanic corrosion (7.5% plus).
• Running at or above 7.5% offers the best sump life and corrosion inhibition on cast iron chips.
• MicroSol 585XT is not recommended for use on very reactive metals such as magnesium.

Features

• Dramatically extends useful life without the need for tank-side biocides or fungicides.
• Low foaming for todays' demanding high-pressure, high-volume applications.
• Compatible with a very wide range of material including cast iron, steels, copper, titanium and aluminum alloys and many plastics and composites.
• Optimized combination of cooling and lubricity for titanium machining applications.
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems.
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
• Contains no nitrites, triazines, phenols, chlorinated or sulfurized EP additives.
• Provides superior corrosion inhibition on all ferrous and non-ferrous metals.
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance.
• Requires no special disposal or recycling techniques.

Technical Data

• Recommended usage concentration in water: 4.0% - 10.0%.
• To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
• Use premixed coolant as makeup to improve coolant performance and reduce coolant purchases. The makeup you select should balance the water evaporation rate with the coolant carryout rate.
• Use mineral-free water to improve sump life and corrosion inhibition while reducing carryoff and concentrate usage.