Shanks For Boring Heads
Shanks from Travers will give tightened locking screws that going give the most extreme inflexibility between the exhausting head and the tool holder to build exactness. It comes in many types like Brown and Sharpe, CAT shank, national standard, and many more. We will navigate you to know which shank will be used with which of the boring heads. The shank type of Brown and Sharpe can be used for boring heads and also for fly cutters. Its style will be drawbar end and it can be used with 7/8 inches- 20 threading boring heads. Shank type of CAT has a modular coupling system that provides maximum rigidity and tool holder to increase accuracy. It is made of alloy steel for long, durable service life. It comes in drawbar end style and it can be used with BohrStar boring kits, 7/8 inch-20 and 1-1/2 inches - 18 thread boring heads. National standard shanks are suitable for precision boring of cylindrical holes and for machining of external cylindrical surfaces. It comes with a style of drawbar end and drives flange. Its taper is 30 NS to 50 NS and can be used with 7/8 inches-20 and 1-1/2 inches - 18 thread boring heads. Straight shank provides drawbar end style and comes with a taper ranging from 1 inch to 5/8 inches or larger. It can be used with 7/8 inch-20 and 1-1/2 inches - 18 thread boring heads. Taper shank comes in three styles; Drawbar end, tang type, and tang type, and drawbar end in one. It provides taper ranges from 2MT to R8. It can be used with BohrStar boring kits, 7/8 inch-20 and 1-1/2 inches - 18 thread boring heads, VHU-080, VHU-125, and many more. Here on Travers, you can find over 60 Shanks for boring heads and all with the best quality qualifying your needs.
background Layer 1 background Layer 1