YG 3/4"-16 Size, H5 Thread Limit, Modified/Semi Bottoming Chamfer, 4 Flute, Bright High Speed Steel EX, Right Hand Cut Spiral Fluted Tap

Chip Disposal During Tapping Made Easy with YG-1's Spiral Fluted Bottoming Taps. This heavy-duty bottoming taps from YMW is designed such that the chips are removed ahead of the cutting direction. The tool material is made up of high-speed steel which makes it ideal for multi-purpose, heavy-duty applications. The YG-1 HSS series bottoming taps are available in bright-finish and TiCN-coated models. The coated models offer better heat resistance to deliver high-performance deep hole tapping. The heat-resistant coating improves tool life and can be used without coolant. The three/four spiral flute design and stainless steel tool material ensure superior performance on any workpiece material. The models are available in over 100 different metric sizes 18 mm x 2.50 mm & below inch sizes of 3/4"-10 & below. The square shank of the tap is designed for superior grip during machine-held applications. Bottom chamfer taps are normally used to get close to the bottom of a blind hole but only after Taper and Plug chamfer taps have removed most of the material. YG-1's HSS series spiral fluted taps deliver faster chip evacuation, efficient thread quality, and higher tapping speeds. It makes it an ideal choice for cutting blind holes. Spiral point taps are known for their versatile applications. Outstanding results can be achieved on different workpiece materials ranging from Steel, Stainless steel, Aluminum, Cast Iron, Waspaloy, Inconel, Titanium, Copper, Brass, Bronze, etc. With its products exported to over 53 countries and manufacturing partners across the United States, Ireland, South Korea, and China, YG-1 has upheld its commitment to provide high-quality cutting tools at a reasonable price.

Benefits

• Unique design works well on a wide range of materials thereby lowering the need to have multiple taps on hand for different materials.
• Less downtime.
• Increased shop productivity.
• Lowered tooling costs.

Applications

• For blind hole applications when chips are needed to be drawn out of the hole.
• Best use in situation where chip disposal is a problem.
• For cutting partially threaded holes.
• Optimum choice for moldmaking, high temp exotic alloy.
• For use on a variety of materials including Steel, Stainless steel, Aluminum, Cast Iron, Waspaloy, Inconel, Titanium, Copper, Brass, Bronze, etc.
• For machine tapping but can also be used by hand.

Features

• Spiral fluted bottoming taps in inch or metric sizes.
• Bright-finished or TiCN coated HSS spiral fluted bottoming taps.
• Three/Four flute designs with H2-H5 & D3-D7 thread limit.
• Modified bottoming chamfer style.
• Right-hand cutting direction.
• Square shank with a smooth surface finishing.
• 2 to 3 lead chamfer.